Käyttäjä:CarmelinaGinn653
First, you need to determine if you need a new screen. The diagnosis is easy. Connect an external monitor to your notebook via its video output port to verify that the notebook's other components still work. If the laptop functions properly, it is time to replace the screen. Please be careful. Laptop internal parts, cables and sockets are very fragile and easy to crack, to rip off, or to brake. It is also a good idea to use some sort of organizer to organize screws by the steps of dis-assembly so you can follow the process in reverse order when assembling the Laptop Screen
Before buying a new LCD, it is necessary to examine and possibly remove, the current one. It help to locate the necessary part numbers to ensure that you get the exact model that is right replacement. For most laptops, you will need only a small Philips screwdriver and a very small flat-head screwdriver or a knife. Before you begin, disconnect the power and remove the laptop's battery.
Then, you need to locate the screw covers. These small rubber covers are normally found on the front of the display's bezel (surrounding frame), though on some notebooks you might find some of the covers along the side of the screen. Use the tip of a small flat-head screwdriver or knife to carefully pry back the corner of each rubber cover around the screen until you can see if a screw lies underneath. If you locate a screw, remove the cover and place it in a safe location. In most cases, a screen has from 4 to 6 screws on the bezel. After you have located them all, remove and store them with the covers.
When screws are removed, try to unsnap the bezel by inserting your fingers between the bezel and the screen. To unsnap the bezel, start at the bottom with most laptops. Much force is not necessary but if you encounter difficulty, it is better to move a little bit further and try a different spot. You may need to slide laptop lid latch to completely remove the bezel. If you are unable to move the screen you may have to remove screws holding screen brackets to the laptop screen lid. Watch out for wires and cables stuck underneath the screen - such as of web-cam or wireless antenna - and be sure not to damage them.
Remove the screws in the metal bracket framing on either side of the screen. Place the screen on soft cloth on the keyboard. You will notice a flat wide video cable. Remove a piece of tape that keeps video cable attached to the back of the screen. Pull the video cable connector out of the socket using finger nail. If you are just replacing the LCD screen (and continue to use the inverter) leave it as is. However, if you are replacing the inverter as well, disconnect the power cable and then unscrew the inverter.
When you open the screen, look for a label on the back showing the manufacturer's part number. This typically consists of one or more letters, followed by a series of numbers. To determine which screen models is compatible with your laptop or if you have difficulty determining model number of your old screen, you may use some on-line illustrated guide.
Since most laptop manufacturers charge too much, you may try to find third-party companies on the market that are selling laptop screens. Some places carry a big inventory of brand new panels to Notebook Screen Replacement. If you are unable to find a particular model listed on their website then you can call or email to ask if they can help you find a screen replacement for a particular laptop.
When the old Apple MacBook Screen has now been removed, the installation of the new screen is done by following these steps in reverse order. The LCD power connector is the last connection to make, after the video cables on the back are in place and the LCD is attached with screws. The final step, before the bezel inserts into place, is making sure the wires are not get pinched.
